Legend of electrical function diagram for Adaptive Brake (ABR) system - PE42.47-U-2050-60FAA
MODEL 204
| Item | Designation | Coordinates |
|---|---|---|
| A1 | Instrument cluster | 14J |
| B24/15 | Yaw rate, lateral and longitudinal acceleration sensor | 10B |
| B37 | Accelerator pedal sensor | 8J |
| L6/1 | Left front axle rpm sensor | 11J |
| L6/2 | Right front axle rpm sensor | 11J |
| L6/3 | Left rear axle rpm sensor | 11J |
| L6/4 | Right rear axle rpm sensor | 11J |
| N3/10 | ME-SFI [ME] control module | 8E |
| N10/1 | Front SAM control module with fuse and relay module | 21E |
| N10/2 | Rear SAM control module with fuse and relay module | 21A |
| N15/5 | Electronic selector lever module control module | 2E |
| N30/4 | Electronic Stability Program control unit | 14E |
| N49 | Steering angle sensor | 16A |
| N80 | Steering column module control unit | 14A |
| S6/1 | Instrument panel switch group | 23H |
| S9/1 | Stop lamp switch | 18J |
| S12 | Parking brake indicator switch | 20J |
| Y3/8 | Fully integrated transmission control control unit | 8A |
| CAN B | Interior CAN | 21D |
| CAN C | Drive train CAN | 5F 8D |
| CAN E | Chassis CAN | 11F 14D 14H 18F |
| CAN H | Vehicle dynamics CAN | 12C |
| LIN 1 | Instrument panel LIN | 22G |
| 1 | Circuit 61, status | 13E |
| 2 | ESP button, status | 16E 22G |
| 3 | Wheel speed, signal | 13G 15J |
| 4 | Electronic selector lever module control unit, status | 6E 12E |
| 5 | Shift stage, status | 8E 12E |
| 6 | Service brake, status | 4E 10E |
| 7 | Steering angle, signal | 15D |
| 8 | Yaw rate, lateral and longitudinal acceleration sensor, signal | 14D |
| 9 | Brake light switch, status | 16G |
| 10 | Parking brake indicator switch, status | 16E 21G |
| 11 | Engine torque, reduce request | 10E |
| 12 | Variant coding, signal | 17E |
| 13 | Brake lights, request | 20B 20E 22C |
| 14 | Accelerator pedal sensor, signal | 8G 12E |
| 15 | Dynamometer mode, status | 15G |
| 16 | Instrument cluster, message | 15J |