Separate WAISTRAIL Panel - Ar62.40-D-6025-01H

The following operation steps are shown on model 906.633.

1. Expose spot welds on dash support paneling (1) (areas A, B, C and D).
2. Expose spot welds on waistrail panel (1) (areas A, B, C and D).
3. Remove damaged dash support paneling (1).

   Courtesy of MERCEDES-BENZ USA

4. Grind cross-hatched areas down to bare metal.
5. Remove shavings and drill chips.
6. Coat insides of spot weld flanges with zinc dust paint.

   Courtesy of MERCEDES-BENZ USA