Adjust Door Gap And Ridge Pattern For Hinged Door - Ar72.15-D-1021-01B

HINGED DOORS CHECK VALUES

Number	Designation		Model 906
BE72.15-N-1001-01A	Top door gap	mm	5 (± 0.8)
BE72.15-N-1002-01A	Bottom door gap	mm	5.5 (± 1.0)
BE72.15-N-1003-01A	A-pillar door gap	mm	5.5 (± 1.0)
BE72.15-N-1004-01A	Door gap on B-pillar	mm	5.5 (± 1.0)
BE72.15-N-1005-01A	Door gap on wheel well	mm	6.5 (± 1.0)

HINGED DOORS

Number	Designation		Model 906.1/6/7	Model 906.2
BA72.15-N-1008-01C	Bolt, door hinge to hinged door	Nm	23	23

Fig 1: Feeler Gangue (129 589 03 21 00)

Courtesy of MERCEDES-BENZ USA

1. Loosen bolts (1) on door hinges.
2. Adjust door gap by vertically and horizontally adjusting door all the way around
3. Adjust ridge pattern by vertically adjusting door.
4. Tighten bolts (1). Observe specified tightening torque.

   Courtesy of MERCEDES-BENZ USA