Remove/Install Windshield Wiper Arm - Ar82.30-D-6951A

MODEL 906.1/2/6/7 

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities.	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Remove transmitter key from electronic ignition switch control unit	The wiper arms (1) must be in the basic position before removal; if necessary, move wiper arms (1) to the basic position before removing the transmitter key.
2	Open engine hood
3	Detach washer fluid hose (2) of wiper arm (1) on waistrail
4	Unscrew nut (3)		*BA82.30-N-1001-01D
5	Pry wiper arm (1) off the wiper shaft	When positioning the wiper arm (1), align the wiper blade to the marks (arrows) on the windshield.
		Assembly wedge	Fig 1
6	Install in the reverse order

WINDSHIELD WIPER

Number	Designation		Model 906
BA82.30-N-1001-01D	Nut, windshield wiper arm	Nm	30

Fig 1: Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA