Adjust rear-axle toe - AR40.20-P-0261P
MODEL 171, 172, 203
| While working on the rear axle care must be taken to ensure that the surfaces of aluminum components do not get any scratches, cracks and notches. Otherwise the service life of the of the parts will be reduced. | ||
| Loosen nut of cam bolt (60a) Notes on self-locking nuts and bolts | ||
| Adjust toe with cam bolt (60a) | Overall toe-in at rear axle Permitted difference between right and left side of vehicle for rear-axle toe If the test values are not reached, replace tie rod (60): Remove/install tie rod (60) and install a new rubber mount |
AR35.20-P-0112V |
| Tighten nut of cam bolt (60a) | BE40.20-P-1000-10A |