Remove/install driver's side interior fuse box - AR54.15-P-1310V

MODEL 171.4 

Fig 1: Identifying Driver Side Interior Fuse Box Components

Courtesy of MERCEDES-BENZ USA

	Removal/installation
1	Disconnect ground cable of battery		AR54.10-P-0003V
2	Unclip cover (1) from instrument panel (2).		Fig 2
3	Remove fuses (3).	Installation:  For installation location of fuses (3) refer to: ↓
		Fuse assignment of driver's side interior fuse box	GF54.15-P-1256-04SK
4	Unscrew screw (4) and remove interior fuse box (F34) from mount at instrument panel (2).
5	Press hook (6) inwards using a suitable screwdriver and remove fuse holder (7), with fuses installed, from interior fuse box (F34).	Number of fuse holders (7) depending on equipment. Installation:  Pay attention to color and shape coding of fuse holder (7). Route electrical lines of fuse holder (7) without lines crossing over. For installation location of fuse holder (7) with fuses installed refer to: ↓
		Fuse assignment of driver's side interior fuse box	GF54.15-P-1256-04SK
6	Unscrew securing nut of positive cable (5) on back of interior fuse box (F34) and remove positive cable (5).		*BA54.15-P-1004-01A
7	Remove plug contacts (8) of fuses (3) from interior fuse box (F34)		*WH58.30-Z-1002-32A
		Installation:  Observe installation location of plug contacts (8) otherwise damage may occur to electrical system if plug contacts are assigned incorrectly. Installation:  Route electrical lines without lines crossing over.
8	Remove interior fuse box (F34).
9	Install in the reverse order

FUSE AND RELAY BOX

Number	Designation			Model 171
BA54.15-P-1004-01A	Nut, positive battery cable to fuse box	M6	Nm	7

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1002-32A	Commercially available pressing tools for E95, SPT and MPT contacts