Arrangement and assignment of Z connector sleeves (solder splices in wiring harness) - trunk (left) - GF00.19-U-3000-06TA
MODEL 171
Fig 1: Identifying Arrangement And Assignment Of Z Connector Sleeves (Solder Splices In Wiring Harness) - Trunk (Left)
| Z conn. sleeve | Designation | Comp. | Designation | Conn. pin |
|---|---|---|---|---|
| Z6/92 | Trunk lid ground connector sleeve | ← W6 | Ground (left wheelhousing in trunk) | |
| → E19/1 | Left license plate lamp | 1 | ||
| → E19/2 | Right license plate lamp | 1 | ||
| → E21 | Center high-mounted stop lamp | 1 | ||
| → S88/1 | Rotary tumbler/trunk lid microswitch | 3 | ||
| → S88/8 | Trunk lid external operation switch | 1 | ||
| Z28/57 | Portable CTEL control signals connector sleeve | ← N123/1 | Universal Portable CTEL Interface (UPCI [UHI]) control module | 1.28 |
| ← N123/4 | Emergency call system control unit | 1.14 | ||
| → A28/3 | E-net compensator | 1.3 |