LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> SLK300 Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - 171 Chassis >> Testing & Repair >> Checking shock absorber - AR32.25-P-0121V

Checking shock absorber - AR32.25-P-0121V

MODEL 171.4 

INSPECT Check    
1 Check piston rod for surface damage, bending and for moving in the guide bush without jamming If necessary after testing, dispose of shock absorber: ↓
Disposing of shock absorber yourself		  
REFER TO FORMS   Disposing of shock absorber OS32.25-P-0121-01GC 
    Disposal by scrap dealer  
REFER TO FORMS   Notes on scrapping gas-filled hydraulic components OS00.00-P-1000-01A
2 Check rubber mount in body eye IMPORTANT The rubber mounts must be seated securely in the body eye and must not be cracked or damaged. If fitted, damaged rubber mounts can cause knocking noises. If necessary after testing, dispose of shock absorber: ↓
Disposing of shock absorber yourself		  
REFER TO FORMS   Disposing of shock absorber OS32.25-P-0121-01GC 
    Disposal by scrap dealer  
REFER TO FORMS   Notes on scrapping gas-filled hydraulic components OS00.00-P-1000-01A
3 Shock absorbers, inspecting for leaks IMPORTANT A thin film of oil on the shock absorber is permissible. If necessary after testing, dispose of shock absorber: ↓
Disposing of shock absorber yourself		  
REFER TO FORMS   Disposing of shock absorber OS32.25-P-0121-01GC 
    Disposal by scrap dealer  
REFER TO FORMS   Notes on scrapping gas-filled hydraulic components OS00.00-P-1000-01A
scientia non olet · About LEMON Manuals