Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230A

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 129, 140, 163, 170, 171, 202, 203, 208, 210

Model 129, 140, 170, 202, 203, 208, 210

Fig 1: Locating Attachment Holes For Mercedes-Benz Quick-Clamping Devices - Model 129, 140, 170, 202, 203, 208, 210

MODEL 163

Fig 2: Locating Attachment Holes For Mercedes-Benz Quick-Clamping Devices - Model 163

Fig 3: Identifying Mercedes-Benz Quick-Clamping Device

	Installing, removing
1	Attach quick-clamping devices to front and rear axles and remove clamp handles	The mounting bell is centered on the front wheel hub or rear axle shaft flange by locating the tracer pins in the five mounting holes (arrows) in the rim. Check quick-clamping devices, wheel mirrors and measurement sensors at regular intervals in accordance with the manufacturer's instructions Quick-clamping device	Fig 4
2	Attach wheel mirrors or measurement sensors
3	Remove in reverse order

Fig 4: Identifying Quick Clamping Device (124 589 01 31 00)