LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> SLK300 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Body Sealing, Corrosion Protection -- 203 Chassis) >> Testing & Repair >> Install transport foil - AR97.20-P-4000A

Install transport foil - AR97.20-P-4000A

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 129, 163, 168, 170, 202, 203, 208, 209, 210, 211, 215, 220, 230, 240, 414 with CODE (524) Paint protection 

IMPORTANT Notes on transportation sheeting Model 129, 163, 168, 169, 170, 202, 203, 208, 209, 210, 211, 215, 220, 230, 240, 414 AH97.20-P-9409-03A 
1.1 Remove old transport foil IMPORTANT If old transport foil is present. Using heat simplifies removal of transport foil. Do not heat transport foil too much to prevent paint damage  
2 Clean the vehicle IMPORTANT Chamois the vehicle dry.  
3 Check paint surface on vehicle IMPORTANT Visible adhesive tape marks from repainting can remain because they are removed before the vehicle is shipped.
IMPORTANT It is not necessary to take swelling into consideration when repainting. The new transport foil can be installed on these paint surfaces
 
4 Install new transport foil by hand IMPORTANT Do not mask plastic parts and rubber profiles not with new transport foil