LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> SLK300 Standard >> Repair and Diagnosis >> Collision >> General Collision Information >> Side Wall >> Testing & Repair >> Replace side rear inside panel - AR63.20-P-1400V >> Weld in side rear inside panel - AR63.20-P-1400-03V

Weld in side rear inside panel - AR63.20-P-1400-03V

Fig 1: Identifying Portal Frame (129 589 03 23 00)
G05028156Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Weld In Device (171 589 00 23 00)
G05028157Courtesy of MERCEDES-BENZ USA
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1003-01A Electrode miller
WH58.30-Z-1003-02A Clamping pliers
WH58.30-Z-1001-40A Tarp (fire-resistant)
WORKSHOP EQUIPMENT

WE58.40-Z-1002-02A Spot welder
  1. Install side rear inside panel (1) SPECIAL TOOL portal frame (2) and SPECIAL TOOL welding device and fit.

    IMPORTANT Check installation position of side rear inside panel (1) by installing rear fender.

  2. Fasten side rear inside panel (1) with clamping pliers.
    Fig 3: Identifying Side Rear Inside Panel And Portal Frame
    G05028158Courtesy of MERCEDES-BENZ USA
  3. Weld in side rear inside panel (1) with POLARIZATION RESISTANCE SINGLE-ROW SPOT WELD (area A).
    Fig 4: Identifying Welding Areas On Side Rear Inside Panel
    G05028159Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals