Position trunk lid in assembly position. - AR88.50-P-5000-01V

Fig 1: Identifying Support (170 589 04 63 00)

Courtesy of MERCEDES-BENZ USA

The trunk lid (1) can be moved to the assembly position with the Vario roof open or closed.

1. Switch on ignition and actuate Vario roof actuation switch until trunk lid (1) is completely up.
2. Switch off ignition.
   Fig 2: Identifying Trunk Lid

   Courtesy of MERCEDES-BENZ USA
3. Release trunk lid lock with emergency key and move trunk lid (1) to assembly position.
4. Attach support (2).

   Do not load trunk lid (1) in assembly position, otherwise, the tubular frame and hinge levers could be damaged.

5. Return trunk lid (1) to initial position in reverse order.
   Fig 3: Identifying Trunk Lid And Support

   Courtesy of MERCEDES-BENZ USA