Remove/install main audio components - AR82.60-P-7605V
MODEL 171.4 with CODE (525) MB Audio 50 APS radio with CODE (527) COMAND APS with single DVD drive (with navigation system) with CODE (529) HIGH Class Japan
MODIFICATION NOTES
| 5.7.06 | "Disconnect/connect battery ground line" removed |
| Remove/install | |||
|---|---|---|---|
| 1.1 | Buffer the basic data from the audio gateway control unit (N93/1) in STAR DIAGNOSIS | When installing new audio gateway control unit (N93/1). |
|
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| STAR DIAGNOSIS diagnosis system | *WE58.40-Z-1013-06A | ||
| 2 | Move front passenger seat to end position toward rear | ||
| 3 | Re-lay floor covering (1) to the back on the passenger-side | ||
| 4 | Remove impact absorber (2) from step plate (3) | ||
| 5 | Remove nuts (4) and remove step plate (3) from front passenger footwell | ||
| 6 | Cut cable tie (5) | ||
| 7.1 | Remove ETC [EGS] control unit from equipment carrier (10) and place to one side with electrical connectors still connected | With TRANSMISSION 722.6 | AR27.19-P-1719V |
| 8 | Remove nuts (6) and bolts (7) | ||
| 9 | Turn over equipment carrier (10) with audio gateway control unit (N93/1) and disconnect the electrical connectors (8) | ||
| 10 | Unplug fiber optic cable connector (9) | ||
| 11 | Cover up the fiber optic cable connector (9) | ||
| 12 | Remove audio gateway control unit (N93/1) with equipment carrier (10) from front passenger footwell | ||
| 13.1 | Remove nuts (11) and remove audio gateway control unit (N93/1) from equipment carrier (10) | Only when replacing audio gateway control unit (N93/1) | |
| 14 | Install in the reverse order |
WORKSHOP EQUIPMENT/MB TESTERS (SEE WORKSHOP EQUIPMENT MANUAL)
| WE58.40-Z-1013-06A | STAR DIAGNOSIS Compact diagnosis system for passenger cars, order number 6511 1801 00 |