Remove, install tire pressure monitoring system control unit - AR40.15-P-0100R
MODELS 230 with CODE (475) Tire pressure monitor (Beru) with CODE (475) Tire pressure monitor (Siemens)
MODIFICATION NOTES
| 5.11.02 | Read out variant coding and transfer to a new TPM [RDK] control unit, added | Stage 2 | |
| 5.11.02 | Activate tire pressure monitor, added | Step 11 |
| Remove/install | |||
|---|---|---|---|
| 1.1 | Close vario roof | ||
| 2 | Read in variant coding of the TPM [RDK] control unit (N88) in STAR DIAGNOSIS | When replacing the ME-SFI [ME] control unit (N88) |
|
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| STAR DIAGNOSIS diagnostic system | *WH58.30-Z-1048-13A | ||
| 3 | Remove left paneling (1) in luggage compartment | AR68.30-P-4800R | |
| 4 | Disconnect electrical connector (2) and electrical connector (3) of the left and right Keyless Go antenna in the luggage compartment from the Keyless Go control unit (N69/5) | ||
| 5 | Unscrew nut (4a), loosen nuts (4b) | ||
| 6 | Remove control unit carrier (4) from the installation position and put down in luggage compartment | ||
| 7 | Detach TPM [RDK] control unit (N88) from control unit carrier (4) | ||
| 8 | Release and disconnect electrical connector (5) | ||
| 9 | Install in the reverse order | ||
| 10 | Read out fault memory and erase if required | ||
| 11 | Activate tire pressure monitor | AR54.30-P-1000-02RAR |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation | |
|---|---|---|
| WH58.30-Z-1048-13A | STAR DIAGNOSIS diagnostic system, Compact Passenger Car | 6511 1801 00 |