Remove/install rear spring - AR32.20-P-0230R

MODEL 230 except CODE (487) Active Body Control (ABC) 

	Remove/install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Risk of injury  caused by pinching or crushing  when working on springs or spring bodies that are under load	Use only approved tensioning devices; shield off hazard area if necessary. Inspect special tools for damage and proper operation (visual inspection). Wear protective gloves.	AS00.00-Z-0001-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Springs; general background information.		AH32.20-P-9404-01A
1	Remove rear wheel
	Remove and install wheels		AP40.10-P-4050Z
2	Remove rear suspension strut		AR32.25-P-1016RA
3	Disassemble rear suspension strut		AR32.25-P-1018TS
4	Install in the reverse order