Remove/install pulsation damper - AR32.50-P-0013RX (SL550, SL55AMG 2007-2008, SL63 AMG, SL600 2007-2009, SL65 2006-2011)

MODEL 230.456 /458 with CODE (487) Active Body Control (ABC) 

MODEL 230.470 /471 /472 /477 

MODEL 230.479 as of model year 2006 

Fig 1: Identifying Pulsation Damper Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Notes on Active Body Control suspension		AH32.50-P-0001-01N
	1	Remove tandem pump (1)	AR46.30-P-0500RX
2	Clean the area around the pulsation damper (2)
3	Clamp tandem pump (1) or hydraulic pump in vise by fixing arm (4) so that pulsation damper (2) points toward floor	The pulsation damper (2) should always be detached from the tandem pump (1) or from the hydraulic pump with the threaded opening (3) facing down, otherwise dirt will enter the tandem pump (1) or hydraulic pump. In the event of noncompliance this can lead to the failure of the ABC system.
4	Unscrew pulsation damper (2) from tandem pump or hydraulic pump	Installation:  Pay attention to correct seat of the sealing ring.
			*BA32.50-P-1030-01A
	Notes on scrapping gas-filled hydraulic components		OS00.00-P-1000-01A
5	Install in the reverse order