Remove/install trunk retractable partition - AR68.50-P-3000R

MODEL 230.4 up to 28.2.06 

Fig 1: Identifying Trunk Retractable Partition Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Completely close Vario roof.
2	Open trunk lid
3	Remove trunk partition (1) from pushbuttons (2)
4	Remove expansion clips (3)	Installation:  Replace damaged expansion clips (3).
5	Remove left and right cover (5).	Carefully pull out covers (5) toward rear to prevent damage.
6	Unscrew bolts (4) and remove trunk partition (1)
7	Install in the reverse order