Removing and installing taillamp - AR82.10-P-4905R

MODEL 230.4 

Fig 1: Identifying Taillamp Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove left or right side paneling in trunk		AR68.30-P-4800R
2	Disconnect electrical connector (1)
3	Remove overpressure reservoir and place to one side with pneumatic line still connected	When removing the left taillamp (E3) on vehicles with code (404) Left multi-contour seat or code (405) Right multi-contour seat. See:↓
		Remove/install overpressure reservoir for multi-contour backrest	AR91.25-P-1650R
4	Unscrew nuts (2).
5	Remove left taillamp (E3) or right taillamp (E4)	Installation:  Check gasket (3) at left taillamp (E3) or at right taillamp (E4) for damage. Ensure gasket (3) is fitted correctly.
6	Install in the reverse order