Install locking lug on rear longitudinal member - AR64.20-P-1240-03SX

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1003-01A	Electrode miller
WH58.30-Z-1003-02A	Clamping pliers

WORKSHOP EQUIPMENT

WE58.40-Z-1002-02A	Spot welder
WE58.40-Z-1001-03A	Drill (electric/pneumatic)
WE58.40-Z-1005-03A	Wet/dry vacuum cleaner

Fig 1: Identifying Rear Longitudinal Member Locking Lug Welding Areas (1 Of 2)

Courtesy of MERCEDES-BENZ USA

1. Install rear locking lug (2), fit and fasten with clamping pliers.
2. Weld in rear locking lug (2) on rear longitudinal member (1) with (areas A, B and C).
3. Weld in rear locking lug (2) with (areas D and E).

Fig 2: Identifying Rear Longitudinal Member Locking Lug Welding Areas (2 Of 2)

Courtesy of MERCEDES-BENZ USA