Prepare rear window for installation - AR67.20-P-1000-07SXS
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1019-02A | Bonding agent Sika primer 206 G+P | Sika Deutschland GmbH Stuttgarter Strasse 139 72574 Bad Urach Germany Tel. +49 7125 940-761 Fax +49 7125 940-763 www.sika-industry.de |
| BR00.45-Z-1090-02A | Sika activator | A 005 989 58 71 |
| BR00.45-Z-1025-04A | Cleaner | A 005 989 19 71 |
The adhesive area on the rear-end window must be absolutely free of dust and grease to prevent a decrease in the gluing force when installing the window.
- Lift rear-end window and check for scratches and damages, replace if required.
Suction lifting device http://gotis.aftersales.mercedes-benz.com
Position the suction lifting device in the upper third of the rear-end window so that the lifted rear-end window is parallel to the C-pillars when installing. Otherwise, the edges of the rear-end window could hit against the body flange when installing and break.
- Clean adhesive areas on rear-end window, allow to flash off and coat with activator.
Observe flash-off time for activator.
- Coat adhesive areas on rear-end window with primer.