Rear axle center assembly crown wheel - BA35.31-P-1000-03A

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 129.058/063 as of 6/1/94, 129.059/064, 140.02/03 as of 6/1/94, 170.465/466, 202.033/085/093/133/193, 203.006/064/206/264/706, 208.365/370/374/465/470, 210.006/015/017/025/045/053/055/063/065/08/206/215/217/225/245/263/265/28/606/663, 220.063/065/087/165/167/183/184/187 with rear axle center assembly Ø 198

MODEL 202.134/194, 203.004/204, 210.007 with CODE 450 (Taxi version) with rear axle center assembly Ø 198

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 129.058/063 as of 01.06.94, MODEL 129.059/064	MODEL 140.02/03 as of 01.06.94
BA35.31-P-1001-03A	Retaining bolt, ring gear to differential case	Nm	85	85

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 170.465/466	MODEL 202.033/085/093/133/193, MODEL 202.134/194 with CODE 450
BA35.31-P-1001-03A	Retaining bolt, ring gear to differential case	Nm	85	85

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 203.004/204 with CODE 450, MODEL 203.006/064/206/264/706	MODEL 208.365/370/465/470
BA35.31-P-1001-03A	Retaining bolt, ring gear to differential case	Nm	85	85

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 208.374	MODEL 210.006/015/017/025/045/053/055/063/065/08/206/215/217/225/245/263/265/28/606, MODEL 210.007 with CODE 450
BA35.31-P-1001-03A	Retaining bolt, ring gear to differential case	Nm	-	85

REAR AXLE DIFFERENTIAL RING AND PINION

Number	Designation		MODEL 220.063/065/087/165/167/183/184/187
BA35.31-P-1001-03A	Retaining bolt, ring gear to differential case	Nm	85