Remove/install fuel pump - AR47.20-P-5710SX
ENGINES 156, 157, 273, 275, 278 in MODEL 216
ENGINES 156, 157, 272, 273, 275, 276, 278 in MODEL 221
| Remove/install | |||
|---|---|---|---|
| Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| 1 | Check fuel level | Empty fuel tank if fuel pump is intact. |
AR47.10-P-4001SX |
| Empty fuel tank if fuel pump is faulty. | AR47.10-P-4000SX | ||
| 2 | Open fuel filler flap and filler cap | ||
| 3 | Move front passenger seat to front-most position | ||
| 4 | Switch off ignition | ||
| 5.1 | Remove right or continuous rear seat cushion | Vehicles without top protection Model 221.0 with code 223, rear bench seat with electrically adjustable outer seats, lumbar support and pneumatically raisable head restraints. Model 221.1 with code 223, rear bench seat with electrically adjustable outer seats, lumbar support and pneumatically raisable head restraints or with code 224, Design rear bucket seat system. |
AR91.12-P-1020SZ |
| Model 221.0 except code 223, rear bench seat with electrically adjustable outer seats with PRE-SAFE positioning function for outer seats and outer head restraints. Model 221.1 except code 224, rear bench seat with electrically adjustable outer seats with PRE-SAFE positioning function for outer seats and outer head restraints, code 223 and except Design rear bucket seat system. |
AR91.12-P-1020SY | ||
| Model 221.0 with code 223, rear bench seat with electrically adjustable outer seats with PRE-SAFE positioning function for outer seats and outer head restraints. Model 221.1 with code 223, rear bench seat with electrically adjustable outer seats with PRE-SAFE positioning function for outer seats and outer head restraints, or with code 224, Design rear bucket seat system. |
AR91.12-P-1020SX | ||
| Model 216 | AR91.12-P-1020SC | ||
| 5.2 | Remove seat adjustment mechanism (8) on right rear seat | Model 221 with maximum protection, code Z07 | AR91.12-P-1520SXS |
| 6.1 | Fold back the insulation mat (1) | Vehicles without top protection | |
| 6.2 | Unclip floor covering (9) in the area of special protection mat (10) and lift | Model 221 with maximum protection, code Z07 | |
| 7 | Lift special protection mat (10) and set aside | Model 221 with maximum protection, code Z07 |
|
| 8 | Turn cover (2) counterclockwise and remove | ||
| 9 | Unscrew nuts (3a) | *BA47.10-P-1001-01L | |
| 10 | Remove ring (3) and cover (4) | ||
| 11 | Release and disconnect fuel pump connector (M3x1) | ||
| 12 | Release and detach fuel line (5) | ||
| 13 | Open catches (6) in direction of the arrow | ||
| 14 | Remove fuel pump (M3) from swirl pot (7) | ||
| 15 | Install in the reverse order | ||
| Checking | |||
| Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A | |
| 16 | Start engine and check fuel system for leaks |
FUEL TANK
| Number | Designation | Model 216 | Model 221 | |
|---|---|---|---|---|
| BA47.10-P-1001-01L | Nut on fuel filter or cover to fuel tank | Nm | 5 | 5 |