Adjusting fixtures for distance and comparison measurement according to the model concerned - AR40.30-P-0401-01SX

MODEL 216, 221.0/1 

Fig 1: Identifying Mount (170 589 00 63 00)

Courtesy of MERCEDES-BENZ USA

1. Slide suspension (07) as far as the end stop on the threaded bolts.
2. Align suspension (07) horizontal and adjust dimensions (see next picture) at the mounts (07r, 07s), see Table.

   The suspension (07) enables the vehicle center to be displayed with the check point (K).

   shown on model 221 

   Fig 2: Identifying Slide Suspension

   Courtesy of MERCEDES-BENZ USA
   Fig 3: Identifying Adjustment Dimensions Of Left And Right Side Supports

   Courtesy of MERCEDES-BENZ USA