Pressing grooved ball bearing out of rubber mount of propeller shaft, pressing in - AR41.10-P-0100-02SX

Fig 1: Identifying Removal And Installation Tool (116 589 09 43 00)

Courtesy of MERCEDES-BENZ USA

Press out 

1. Using extraction and insertion tool (04), press grooved ball bearing (8) out of bearing seat lined with rubber(7).
   Fig 2: Pressing Grooved Ball Bearing Out Of Bearing Seat

   Courtesy of MERCEDES-BENZ USA

   Pressing in 

2. Using extraction and insertion tool, press in grooved ball bearing (8) up to the contact surface (arrows) in bearing seat lined with rubber.

   Ensure correct seat of grooved ball bearing.

Fig 3: Pressing In Grooved Ball Bearing

Courtesy of MERCEDES-BENZ USA