Remove/install spare wheel well paneling - AR68.30-P-4620GZ

MODEL 164 

Illustrated on model 164.1 with load compartment package, code 942 and luggage compartment cover, code 723 

Fig 1: Identifying Spare Wheel Well Paneling - Illustrated On Model 164.1 With Load Compartment Package

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Illustrated on model 164.1 with load compartment package, code 942 and luggage compartment cover, code 723 

Fig 2: Identifying Vehicle Tool Kit Molded Part - Illustrated On Model 164.1 With Load Compartment Package

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Illustrated on model 164.1 with load compartment package, code 942 and luggage compartment cover, code 723 

Fig 3: Identifying Spare Wheel Well Paneling - Illustrated On Model 164.1 With Load Compartment Package

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Open tailgate
2.1	Open luggage compartment cover	Only on vehicles with luggage compartment cover, code 723.
3	Open load compartment floor and secure
4.1	Remove spare wheel	Only on vehicles with spare wheel on steel rim, code 669.
5	Remove vehicle tool kit shaped part (2) upward	Installation:  Observe installation position.
6	Remove rear door sill molding		AR68.30-P-4100GZA
7.1	Remove clips from outer edges on spare wheel recess paneling (1).	If present.
8	Pull outer edges of spare wheel recess paneling (1) toward inside (arrows)	Do not kink spare wheel recess paneling (1), danger of breakage! Installation:  Ensure that outer edges of spare wheel recess paneling (1) are seated correctly.
9	Install in the reverse order