Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230GZ

MODEL 164 

Shown on model 164.1 

Fig 1: Attaching Mercedes-Benz Quick-Clamping Devices - Shown On Model 164.1

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Quick-Clamping Devices - Shown On Model 164.1

Courtesy of MERCEDES-BENZ USA

	Installing, removing
1	Attach quick-clamping devices to the front and rear wheels, remove clamping handles	The mounting bell is centered on the front wheel hub or rear axle shaft flange by locating the tracer pins in the five mounting holes (arrows) in the rim. Check quick-clamping devices, wheel mirrors and measurement sensors at regular intervals in accordance with the manufacturer's instructions.
		Quick clamping device	Fig 3
2	Attach wheel mirrors or measurement sensors
3	Remove in the reverse order

Fig 3: Identifying Quick-Clamping Device (124 589 01 31 00)

Courtesy of MERCEDES-BENZ USA