Legend of wiring diagram for remote trunk closing control unit - PE72.30-P-2101-60MAA
Model 164 up to model year 08/YoM 07 with CoDE (890) EaSY-PaCK liftgate control unit N121/1
| Code | Designation | Coordinates |
|---|---|---|
| A0 | Color code key | 23L |
| B24/16 | Rear-end door opening angle recognition sensor | 22L |
| B24/16x1 | Rear-end door opening angle recognition sensor connector | 22J |
| B86/1 | Left rear-end door closing obstruction sensor strip | 10L |
| B86/1x1 | Left rear-end door closing obstruction sensor strip connector | 10J |
| B86/2 | Right rear-end door closing obstruction sensor strip | 11L |
| B86/2x1 | Right rear-end door closing obstruction sensor strip connector | 11J |
| F4 | Load compartment fuse and relay box | 4L |
| F4f40 | Fuse 40 | 3L |
| H4/60 | Rear-end door closing warning buzzer | 13L |
| M51/1 | Rear-end door hydraulic pump | 17L |
| M51/1 | Rear-end door hydraulic pump | 19L |
| M51/1x1 | Rear-end door hydraulic pump connector | 17J |
| M51/1x1 | Rear-end door hydraulic pump connector | 19J |
| N121/1 | Rear-end door closing control module | 4A |
| N121/1 | Rear-end door closing control module | 12A |
| N121/1 | Rear-end door closing control module | 19A |
| S62/26 | RWTS button | 14L |
| U154 | Valid for 164.1 | 6F |
| U155 | Valid for 164.8 | 6F |
| W7/7 | Ground (right spare tire well) | 3E |
| X8/4 | Rear-end door separation point | 12E |
| X30/5 | Left voltage distributor (CAN) connector | 7L |
| X30/7 | Voltage distributor (CAN) connector | 7L |
| Y102 | Automatic rear-end door closing control valve | 20L |