Legend of wiring diagram for headlamp range adjustment (HRA [LWR]) control unit - PE82.10-P-2101-60MAA
Model 164 up to 30.6.07 with CODE (615) Bi-xenon headlamp unit with integrated curve illumination with CODE (616) Bi-xenon headlamp unit with integrated asymmetrical curve illumination control unit N71
| Code | Designation | Coordinates |
|---|---|---|
| A0 | Color code key | 23L |
| B22/9 | Right front level sensor | 12L |
| B22/10 | Right rear level sensor | 14L |
| E1 | Left front headlamp unit | 16L |
| E2 | Right front headlamp unit | 17L |
| F4 | Load compartment fuse and relay box | 3L |
| F4f54 | Fuse 54 | 2L |
| N71 | Headlamp range adjustment control unit | 4A |
| N71 | Headlamp range adjustment control unit | 12A |
| N71 | Headlamp range adjustment control unit | 17A |
| U514 | Not valid for AIRMATIC | 10A |
| W15/1 | Ground (right footwell) | 6G |
| X25/2 | Engine compartment/interior compartment connector | 11H |
| X25/2 | Engine compartment/interior compartment connector | 17E |
| X30/19 | Passenger-side voltage distributor (CAN C) connector | 9L |
| Z36/12 | Headlamp range adjustment (HRA [LWR]) control bus connector sleeve | 17H |
| Z204/4 | Circuit 31 right footwell voltage distributor connector | 6L |