Remove/install instrument cluster - AR54.30-P-6015GZ

MODEL 164 

Fig 1: Identifying Instrument Cluster Remove/Install Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/instal
1	Transfer basic data from instrument cluster (A1) to STAR DIAGNOSIS	Only when replacing the instrument cluster (A1). Installation:  Transfer basic data from STAR DIAGNOSIS to instrument cluster (A1). On vehicles with  retrofitted iPOD and without  telephone the "Telephone"  menu item in the "Instrument cluster"  menu must be set from "NOT PRESENT"  to "PRESENT"  with STAR DIAGNOSIS, to enable the iPOD to be operated via the multifunction steering wheel.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A
2	Extend steering wheel fully and lower fully
3	Insert pulling hooks into slots (1) of instrument cluster (A1) and release catch	Move pulling hooks upwards.
		Pulling hook	Fig 2
4	Pull out instrument cluster (A1)	Do not damage the dashboard. Installation:  Press the instrument cluster (A1) in evenly.
5	Unplug electrical connector (3) and remove instrument cluster (A1)
6	Install in the reverse order
7	Read out fault memory and erase	STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
8	Carry out function check

Fig 2: Identifying Pulling Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnosis system, Compact Passenger Car	6511 1801 00