LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> GLK350 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Brakes - Hydraulic & Mechanical System - Torque Specifications) >> Torque Specifications >> Front Axle Brake Caliper >> Front axle brake caliper - BA42.10-P-1000-10U

Front axle brake caliper - BA42.10-P-1000-10U

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 231.457/465/473/474/479 

MODIFICATION NOTES

31.8.12 Value changed: Bleed screw on brake caliper    
FRONT AXLE BRAKE CALIPER

Number Designation MODEL 231.457/473 MODEL 231.465
BA42.10-P-1001-10U Bolt, brake caliper to steering knuckle with aluminum thread Stage 1 Nm 80 -
Stage 2 ∠° 45 -
with steel bushing Stage 1 Nm 150 -
Stage 2 ∠° 45 -
BA42.10-P-1002-10U Bolt, brake caliper support to steering knuckle Stage 1 Nm - 80
Stage 2 ∠° - 45
BA42.10-P-1003-10U Bolt, support to anti-rattle spring Nm 30 -
BA42.10-P-1004-10U Guide pin, brake caliper for disk brake pad Nm - -
BA42.10-P-1005-10U Bleed screw on brake caliper Nm 18 18
BA42.10-P-1006-10U Bolt, brake pad contact sensor to brake caliper Nm 8 8
FRONT AXLE BRAKE CALIPER

Number Designation MODEL 231.474 except CODEB07 MODEL 231.474 with CODE B07
BA42.10-P-1001-10U Bolt, brake caliper to steering knuckle with aluminum thread Stage 1 Nm - -
Stage 2 ∠° - -
with steel bushing Stage 1 Nm - -
Stage 2 ∠° - -
BA42.10-P-1002-10U Bolt, brake caliper support to steering knuckle Stage 1 Nm 80 180
Stage 2 ∠° 45 -
BA42.10-P-1003-10U Bolt, support to anti-rattle spring Nm 30 -
BA42.10-P-1004-10U Guide pin, brake caliper for disk brake pad Nm - 24
BA42.10-P-1005-10U Bleed screw on brake caliper Nm 18 18
BA42.10-P-1006-10U Bolt, brake pad contact sensor to brake caliper Nm 8 8
FRONT AXLE BRAKE CALIPER

Number Designation MODEL 231.479 except CODEB07 MODEL 231.479 with CODE B07
BA42.10-P-1001-10U Bolt, brake caliper to steering knuckle with aluminum thread Stage 1 Nm - -
Stage 2 ∠° - -
with steel bushing Stage 1 Nm - -
Stage 2 ∠° - -
BA42.10-P-1002-10U Bolt, brake caliper support to steering knuckle Stage 1 Nm 80 180
Stage 2 ∠° 45 -
BA42.10-P-1003-10U Bolt, support to anti-rattle spring Nm 30 -
BA42.10-P-1004-10U Guide pin, brake caliper for disk brake pad Nm - 24
BA42.10-P-1005-10U Bleed screw on brake caliper Nm 18 18
BA42.10-P-1006-10U Bolt, brake pad contact sensor to brake caliper Nm 8 8