Remove/Install Trim At C-Pillar - AR68.30-P-4490CY

Model 204.9 

Fig 1: Identifying C-Pillar Trim Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove edge guard (1) in area of left and right C-pillar paneling (2)
2	Fold left and right rear seat backrest toward front
3	Carefully unhook shackles (7) on C-pillar paneling (2) from clips (3) with assembly wedge		Figure
4	Pull out cargo area interior trim (4) at side and move shackles (6) on C-pillar paneling (2) from catch hook (8) on side cargo area interior trim (4)	Carefully move shackles (6) on C-pillar paneling (2) out of catch hook (8) on side cargo area interior trim (4) to prevent damage. Insert guide (5) on C-pillar paneling (2) into headliner first.
5	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA