Remove/install media interface control unit - AR82.60-P-1030GZ
| Remove/install | |||
|---|---|---|---|
| 1 | Buffer basic data of media interface control unit (N125/1) in STAR DIAGNOSIS Connect STAR DIAGNOSIS and read out fault memory |
When replacing the media interface control unit (N125/1). Installation: Transfer basic data from STAR DIAGNOSIS to the new media interface control unit (N125/1). |
|
| 2 | Remove glove compartment (1) | AR68.10-P-1400GZ | |
| 3 | Disconnect fiber optic cable connector (2) and cover equipment connector at media interface control unit (N125/1) Notes on avoiding damage to fiber optic cables during repair work | With Media Oriented System Transport (MOST) | AH82.60-P-0001-05AK |
| 4 | Separate electrical connectors (3) | ||
| 5 | Remove screws/bolts (4) and remove media interface control unit (N125/1) | ||
| 6 | Install in the reverse order |