Remove/install CD player with changer - AR82.64-P-7507GZ

MODEL 164.1 

Fig 1: Identifying CD Changer, Glove Compartment, Bracket And Bolts

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removal/installation
1	Switch off ignition and remove transmitter key from the EIS control unit	On vehicles with keyless go, code 889: Press keyless go start/stop button repeatedly until the ignition is switched off. Remove the transmitter key from the vehicle and store it in a location beyond its transmission range (at least 2 m).
2	Remove glove compartment (1)		AR68.10-P-1400GZ
3	Disconnect electrical connectors (arrow)	Two electrical connectors.
4	Remove screws (2)	Support CD changer (A2/6) to prevent it from dropping.
5	Remove CD changer (A2/6) with bracket (3)
6	Place CD changer (A2/6) on workbench
7	Remove bolts (4).
8	Pull CD changer (A2/6) forward out of bracket (3)
9	Install in the reverse order