LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> GL350 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System, Equipment & Instructions - 164 Chassis - 1 Of 4 >> Basic Knowledge >> Engine diagnosis indicator lamp, component description - GF54.30-P-5010AMG

Engine diagnosis indicator lamp, component description - GF54.30-P-5010AMG

MODEL 164, 251 with ENGINE 156.980 except CODE (494) USA version up to Model Year 8 

MODEL 209 with ENGINE 156.982 except CODE (494) USA version 

MODEL 211, 219 with ENGINE 156.983 except CODE (494) USA version 

MODEL 216, 221 with ENGINE 156.984 up to Model Year 8 

Location for model 164, 251 

Fig 1: Identifying Engine Diagnosis Indicator Lamp - Shown On Model 164, 251
G10117028Courtesy of MERCEDES-BENZ USA

The engine diagnosis indicator lamp (with the yellow engine symbol) is located at the right in the instrument cluster (A1).

Location on models 209, 211, 219 

Fig 2: Identifying Engine Diagnosis Indicator Lamp - Shown On Model 209, 211, 219
G10117029Courtesy of MERCEDES-BENZ USA

The engine diagnosis indicator lamp (with the yellow engine symbol) is located at the left in the instrument cluster (A1).

Location for model 216, 221 

Fig 3: Identifying Engine Diagnosis Indicator Lamp - Shown On Model 216, 221
G10117030Courtesy of MERCEDES-BENZ USA

The engine diagnosis indicator lamp (with the yellow engine symbol) is located at the right in the instrument cluster (A1).

Task 

The indicator lamp alerts the driver to the reoccurrence of faults relevant to exhaust emissions.

Function 

The ME-SFI control unit (N3/10) actuates the indicator lamp by transmitting an appropriate signal via the CAN data bus to the instrument cluster.

As a function check the indicator lamp is actuated at "Ignition ON". It goes out after engine start if there are no faults relevant to exhaust emissions.