LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> GL350 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System - Body - 164 Chassis - 4 Of 8 >> Basic Knowledge >> Radio/navigation unit, component description >> Radio/navigation unit, component description - GF82.61-P-4111GQ

Radio/navigation unit, component description - GF82.61-P-4111GQ

MODEL 164.1 with CODE (525) MB Audio 50 APS radio as of model year 2009/YoM 08 model refinement package 

MODEL 164.8, 251.0/1 with CODE (525) MB Audio 50 APS radio as of model year 2009/YoM 08 

Shown on model 164.1 

Fig 1: Identifying Radio/Navigation Unit Components - Shown On Model 164.1
G10118152Courtesy of MERCEDES-BENZ USA

Location 

The radio and navigation unit is located in the center of the instrument panel.

Task 

Central operating and display unit for the entertainment and communication systems integrated into the vehicle 

The radio and navigation unit provides the user with a structured and uniform user interface.

Reads in the controls and input signals 

The input factors are read in via the following connections:

Direct line 

The radio and navigation unit comes with the following direct connections:

Interior CAN 

The radio and navigation unit is a subscriber of the interior CAN; it communicates with the following control units, for example:

MOST 

The radio and navigation unit is a subscriber of the MOST; it transmits and receives control and audio signals to and from the following control units:

Evaluation of input factors 

The input factors are processed in the radio and navigation unit.

Actuates output media 

The following direct output signals are possible:

Design 

The radio and navigation unit consists of the following components:

Function 

The following function areas are included in the radio and navigation unit:

Control panels and central computer 

The button actuations of the control panel on the radio and navigation unit are read in and made available for the central computer. Button actuations are further processed in the central computer and sent to additional system components as messages via the MOST or interior CAN.

Pressing the rotary switch on the radio and navigation unit switches on the radio and navigation unit. The volume for the respective set audio source is regulated by turning the rotary switch. The function keys switch over to the audio source desired by the user.

DVD drive 

Data can be read from the navigation DVD or an audio CD and an MP3-CD/DVD can be played using the integrated DVD drive.

Navigation and GPS control unit 

The navigation processor is integrated into the radio and navigation unit and calculates the location of the vehicle from the incoming GPS signals and the vehicle's route after the destination has been entered.

Turn rate sensor 

The turn rate sensor determines the direction changes of the vehicle. It is installed into the navigation processor. A calibration is not required.

REFER TO SYSTEM WIRING DIAGRAMS Cockpit Management and Data System (COMAND) control unit wiring diagram Model 164 PE82.85-P-2101-99MAE
Model 251 PE82.85-P-2101-99RAE