LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> GL350 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System - Body - 164 Chassis - 4 Of 8 >> Basic Knowledge >> Overhead control panel control unit, component description >> Overhead control panel control unit, component description - GF82.20-P-5216GM

Overhead control panel control unit, component description - GF82.20-P-5216GM

MODEL 164.1 as of model year 09/YoM 08 model refinement package 

MODEL 164.8, 251.0/1 as of model year 09/YoM 08 

Shown on vehicle with code (494) USA version 

Fig 1: Identifying Overhead Control Panel Control Unit Component
G10118091Courtesy of MERCEDES-BENZ USA

Location 

The overhead control panel control unit is located in the front area on the headliner.

Task 

The overhead control panel control unit has the following tasks:

Reading in of sensors, pickups and signals 

The input factors are read in with the following connections:

Direct line 

The signals from the following components are read in by the overhead control panel control unit via a direct line:

In addition with code (413) Panoramic glass sunroof with top sliding sunroof:

In addition with code (414) Power glass tilting/sliding roof:

Serial bus 

The signals from the following component are read in by the overhead control panel control unit via a serial bus:

Interior CAN 

The signals are read in by the overhead control panel control unit via the interior CAN.

The resulting functions are described in the relevant function descriptions (see block diagram or function schematic).

Evaluation of input factors 

The input factors that have been read in are evaluated by the integrated microprocessor and the relevant components are then actuated.

Control of systems 

The overhead control panel control unit actuates the following systems:

Voltage supply to components 

The following components are supplied with voltage by the overhead control panel control unit:

Actuation of components 

Components are actuated with the following line:

Direct line 

The following components are actuated with a direct line:

In addition with code (413) Panoramic glass sunroof with top sliding sunroof):

In addition with code (414) Power glass tilting/sliding roof:

REFER TO SYSTEM WIRING DIAGRAMS Wiring diagram for overhead control panel (OCP) control unit Model 164 PE54.21-P-2107-99MAA
Model 251 PE54.21-P-2107-99RAA