Remove/install knee bolster - AR68.10-P-3520G

MODEL 463.237, 463.246 /249 ## as of 141688, 463.271 

Fig 1: Identifying Knee Bolster Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Remove bottom section of dashboard on driver's side	Do not remove EIS control unit from driver-side instrument panel bottom section	AR68.10-P-1505GM
2	Unscrew nuts (2)
3	Remove mounting plates (3)
4	Remove bolts (4).	Installation:  The material of the knee bolster (1) should not deform when screwing in bolts (4).
5	Remove knee bolster (1)	Installation:  Ensure that the retaining brackets (5) do not slip out of the mounting hole (arrow).
6	Install in the reverse order