Connecting and disconnecting quiescent current retension unit - AR54.10-P-1030-07I
Shown on model 220
- Switch on quiescent current retention unit (7).
Quiescent current retention unit
- Connect quiescent current retention unit (7) as follows:
- Connect positive terminal (8) of quiescent current retention unit to positive cable of battery.
- Connect negative terminal (9) of the quiescent current retention unit to battery ground (W10).
- Disconnect negative terminal at battery and insulate negative terminal with insulation tape.
- Disconnect positive terminal clamp from battery (only if battery is to be removed).