Rear Wall & Rear End - 212 Chassis
- General Information
- Testing & Repair
- Detach rear end
- Prepare rear end for welding in - AR64.20-P-1020-02EW
- Install and weld in rear end - AR64.20-P-1020-03EW
- Prepare rear end for installation
- Install rear end
- Replace complete rear end
- Cutting off damaged rear area - AR64.20-P-1200-11ES
- Install spare wheel recess, longitudinal member with console and reinforcement - AR64.20-P-1200-31ES
- Left side rear end damage
- Prepare spare wheel recess - AR64.20-P-1245-02ES
- Partially remove rear longitudinal member - AR64.20-P-1260-01EW
- Prepare rear longitudinal member section - AR64.20-P-1260-02EW
- Install rear longitudinal member section - AR64.20-P-1260-03EW
- Torque Specifications
- Special Tools