Remove/install complete outside mirror - AR88.70-P-9000CW
MODEL 204, 207, 212, 216, 221
Shown on model 204 up to model year 2011
Shown on model 212 as of model year 2014
| Remove/install | |||
| 1 | Unclip left and right mirror triangle paneling (1) and allow electrical line (6) to hang down | Figure | |
| 2 | Remove rear soundproofing from cover on mirror triangle (1) | MODEL 204, 216, 221 | |
| 3 | Unclip window frame paneling in area of threaded connection on left outside mirror (M21/1) or right outside mirror (M21/2) | MODEL 204.9 | |
| 4 | Unclip cover (2) from door lining (3) and remove | Figure | |
| 5 | Disconnect electrical connectors (4) | ||
| 6 | Disconnect electrical connector (8) | MODEL 212 with CODE 501 (360 degree camera) |
|
| 7 | Remove omega clip (7) | MODEL 204, 212 | |
| 8 | Protection door lining (3) in area of bolts (5) against damage with adhesive tape | MODEL 207 | |
| 9 | Remove bolts (5) and remove left outside mirror (M21/1) or right outside mirror (M21/2) | ||
| 10 | Install in the reverse order | ||
| 11 | Calibrate 360° camera for left outside mirror (B84/7) or 360° camera for right outside mirror (B84/8) using Star Diagnosis | MODEL 212 with CODE 501 (360 degree camera) |
|
| AD00.00-P-2000-04A |