Install connection plate for C and D-pillar - AR63.20-P-0500-06TA

WARNING: This page is about a different car, the 2009 Mercedes-Benz E350 and 2008 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1003-01A	Sealant, white, 310 ml, DB supply specification 6069.20	A 001 989 63 20
BR00.45-Z-1001-13A	Blind rivet 6.4 14	A 003 990 35 97

Fig 1: Fitting Connection Plate

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fit connection plate and fasten with clamping pliers. Dimension a = 265 mm.
Drill 6.5 mm dia. rivet holes (area E).
Remove connection plate and deburr rivet holes on both sides.

Fig 2: Identifying Connection Plate Spot Welding Areas (A, B And C)
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Apply MB body sealant to foam part on D-pillar.
Remove and replace damaged foam parts.
Install connection plate and fasten with clamping pliers.
Weld in connection plate with (areas A, B and C).
Weld in connection plate with (area D).
Rivet connection plate and D-pillar with 6.4 dia. x 14 mm Polygrip flat head rivets (area E).