Legend of wiring diagram for ME-SFI [ME] gasoline injection and ignition system control unit - PE07.61-P-2101-60CAC
ENGINE 275.953/982 in MODEL 216.3 Control unit N3/10, on the engine side
| Code | Designation | Coordinates |
|---|---|---|
| A0 | Color code key | 32A |
| A29/1 | Front knock sensor (left side of engine) | 6H |
| A29/2 | Rear knock sensor (left side of engine) | 7H |
| A30/1 | Front knock sensor (right side of engine) | 5H |
| A30/2 | Rear knock sensor (right side of engine) | 5H |
| B6/3 | Camshaft Hall sensor, right cylinder bank | 3H |
| B11/4 | Coolant temperature sensor | 8K |
| B17/8 | Charge air temperature sensor | 17K |
| B28/4 | Pressure sensor downstream of air filter, left cylinder bank | 18K |
| B28/5 | Pressure sensor downstream of air filter, right cylinder bank | 18K |
| B28/6 | Pressure sensor upstream of throttle valve actuator | 25H |
| B28/7 | Pressure sensor downstream of throttle valve actuator | 25H |
| B40 | Oil sensor (oil level, temperature and quality) | 2L |
| G2 | Alternator | 31L |
| G3/3 | Left O2 sensor upstream of catalytic converter | 20H |
| G3/4 | Right O2 sensor, upstream of catalytic converter | 19H |
| L5 | Crankshaft position sensor | 4H |
| M16/6 | Throttle valve actuator | 23H |
| N3/10 | ME-SFI [ME] control unit | 4A |
| N3/10 | ME-SFI [ME] control unit | 12A |
| N3/10 | ME-SFI [ME] control unit | 19A |
| N3/10 | ME-SFI [ME] control unit | 29A |
| N92/1 | ECI ignition module, right cylinder bank | 10H |
| N92/2 | ECI ignition module, left cylinder bank | 14H |
| Y31/5 | Boost pressure control pressure transducer | 26H |
| Y32 | Air pump switchover valve | 18H |
| Y62 | Fuel injection valves | 28H |
| Y101 | Divert air switchover valve | 24H |
| Z5 | Connector sleeve (solder connector in harness) | 19G |
| Z7/41 | Sensor supply connector sleeve | 2G |
| Z7/43 | Sensor ground connector sleeve | 1E |
| Z7/43 | Sensor ground connector sleeve | 1G |