Wiring diagram for Start/Stop engine - PE15.00-P-2103CAA
ENGINES 157, 278 in MODEL 216.3 with CODE (B03) ECO start/stop function
| Wiring diagram for Start/Stop engine | PE15.00-P-2103-97CAA | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Use of wiring diagrams | OV00.01-P-1901-03CAA | ||
| Search aid for all wiring diagram groups | OV00.01-P-1901CAA | ||
| Abbreviations for wiring diagrams | OV00.01-P-1001-27A | ||
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28CAA | ||
| Search aid for all electrical components | MODEL 216.3 Component designation A-S |
OV00.01-P-1909CAA | |
| Search aid for all electrical components | MODEL 216.3 Component designation T-Z |
OV00.01-P-1909CAB | |
| Location and assignment of line and plug connectors | GF00.19-P-1000CAA | ||
| Location and assignment of ground points | GF00.19-P-2000CAA | ||
| Location and assignment of Z connector sleeves (line connectors in wiring harness) | GF00.19-P-3000CAA | ||
| Overview of wiring diagrams covering multiple function groups | PE00.19-P-1100CAA | ||
| Fuse and relay box, as-built configuration | up to model year 08/AEJ (YoM) 07 | GF54.15-P-0800SX | |
| Fuse and relay box, as-built configuration | as of model year 09/AEJ (YoM) 08 | GF54.15-P-0800LE | |
| Repair wiring harness as per specified repair method | The original wire color is visible again after the repair line (length about 30 cm). |
AR00.19-P-0001A |