Remove/install antenna amplifier module - AR82.62-P-8300SX
MODEL 216.3, 221.0
MODEL 221.1 except CODE (Z07) Top protection
Shown on model 221
| Remove/install | |||
| Notes on avoiding damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Lower rear head restraints | ||
| 2.1 | Loosen headliner of roof paneling and, with electrical wiring harness connected, place on the seats as far forward as possible | Model 221.0/1 without code (413) Panoramic sliding roof. | AR68.30-P-4300SX |
| 2.2 | Loosen headliner at the rear and carefully lower until the rear window antenna amplifier module (A2/12) is accessible | Model 221.1 with code (413) Panoramic sliding roof. | AR68.30-P-4300SX |
| 2.3 | Release headliner from roof paneling and put to one side | Model 216.3 | AR68.30-P-4300SC |
| 3 | Disconnect electrical connectors (1) from rear window antenna amplifier module (A2/12) | ||
| 4 | Unscrew nuts (2) | ||
| 5 | Remove rear window antenna amplifier module (A2/12) | ||
| 6 | Install in the reverse order |