LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> CL63 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System - Body - 216 Chassis - 1 Of 9 >> Basic Knowledge >> Backup lamp actuation, function >> Backup lamp actuation, function - GF82.10-P-3011LE

Backup lamp actuation, function - GF82.10-P-3011LE

MODEL 216.3, 221.0/1 as of model year 2009/YoM 08 

Function requirements for backup light actuation in general 

IMPORTANT The circuit status of circuit 15 is provided by the EIS [EZS] control unit (N73) on the interior CAN (CAN-B).

Backup lamp actuation function sequence 

The backup light actuation enables the traffic lane to the rear of the vehicle to be illuminated when backing up.

The status of the current selector lever position is sent by the intelligent servo module for DIRECT SELECT (A80) to the drive train CAN (CAN C) and forwarded by the CDI control unit (N3/9) (with diesel engine) or by the ME-SFI [ME] control unit (N3/10) (with gasoline engine) to the chassis CAN (CAN E).

The central gateway control unit (N93) sends this to the rear SAM control unit with fuse and relay module (N10/2) and for vehicles with code (550) Trailer hitch sent by the trailer recognition control unit (N28/1) to the interior CAN.

The rear SAM control unit actuates the following components.

The trailer recognition control unit actuates the corresponding components for the lighting system on the trailer through the trailer hitch socket, 13-pin (X58).

REFER TO SYSTEM WIRING DIAGRAMS Electrical function schematic for backup light actuation Model 216 PE82.10-P-2058-97CAA
Model 221 PE82.10-P-2058-97SAA
  Component description for intelligent servo module for DIRECT SELECT A80
Transmission 722.6
GF27.19-P-4020ACS
Transmission 722.9 without transmission 722.950 GF27.19-P-4020AHS
Transmission 722.950 in model 221.095/195 GF27.19-P-4020LEH
  Component description for CDI control unit N3/9
On engine 629 in model 221
GF07.16-P-6000OA
On engine 642 in model 221 GF07.16-P-6000OHL
  ME-SFI [ME] control unit, component description N3/10
With engine 156
GF07.61-P-6000MAS
On engine 272 except engine 272.974 GF07.61-P-6000MIS
With engine 272.974 GF07.61-P-6000MEH
On engine 273 GF07.61-P-6000MLS
With engine 275 GF07.61-P-6000MOS
  Rear SAM control unit with fuse and relay module, component description N10/2 GF54.21-P-6030LE
  Trailer recognition control unit component description N28/1
For model 221 with code (550) Trailer hitch
GF31.19-P-4050LE
  Component description for EIS [EZS] control unit N73 GF80.57-P-6003LE
  Central gateway control unit, component description N93 GF54.21-P-4170LE