Update map data status for COMAND navigation system - AP82.85-P-8252A

MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463

MODIFICATION NOTES

28.10.13

"Update of NTG 5.0" added

	Prepare update
1	Check whether a map data update is available to the customer free of charge	* Map update ↓
		Service Information: Free map updates for COMAND	SI82.85-P-0019A
2	Activation code for map data update available in Vehicle Documentation (VeDoc)	* not for USA ↓ * not for USA ↓
		Service information: Copy protection in navigation unit with hard-disk navigation COMAND with copy protection	SI82.85-P-0018A
3	Check state of charge (SOC) of the high-voltage battery	MODEL 212.095/098/195/298 * not for USA ↓
		Service Information: Programming of control units	SI54.21-P-0008B
4	Open engine hood	MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463
		MODEL 204.3, 207, 212 MODEL 204.3, 207, 212 with CODE U60 (Active Bonnet (Pedestrian protection)) Moving the engine hood to the vertical position: Detach left and right clamping levers at the upper left and right hinges.	AR88.40-P-1000EW
	Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
5	Connect battery charger
	Notes on battery		AH54.10-P-0001-01A
	Notes on AGM battery		AH54.10-P-0002-01A
		Only switch on the charger after it has been connected!
6	Switch ignition lock to position "1" (circuit 15R)
7	Switch on COMAND controller unit
8	Remove CDs or DVDs from the COMAND disc drive	When updating using the master DVD
9	Connect the Blu-ray player of the diagnostic system to the front USB connection ports of the COMAND control unit	When updating using the master Blu-ray disc
		Alternatively, connect the master USB stick to the front USB connections of the COMAND control unit. The option to update using Blu-ray is not available in every market. If no Blu-ray option is available: ↓ Carry out update using the master DVD or USB stick.
	Update
10.1	Insert the master DVD and update map data	MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463 When updating using the master DVD Enter the activation code provided in VeDoc and start with the update. Any error messages that may be displayed should be ignored. The update process can take a while to complete. The progress bar indicates how much has been completed. If there are multiple master DVDs, follow the instructions on the COMAND display.
10.2	Insert master Blu-ray disc into external Blu-ray player of XENTRY kit and update map data	MODEL 205, 222 with CODE 531 (COMAND APS) When updating using the master Blu-ray disc (for NTG 5.0) Enter the activation code provided in VeDoc and start with the update. The progress bar indicates how much has been completed. The update version can subsequently be called up via "Navi", "Options" and "Map version".
10.3	Start the menu from the master USB stick and update the map data	MODEL 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 222, 231, 242, 246, 463 When updating using the master USB stick (from NTG 4.5 onwards) Enter the activation code provided in VeDoc and start with the update. The update process can take a while to complete. The progress bar indicates how much has been completed.
11.1	Remove all master DVDs from the vehicle and insert the previously removed CDs or DVDs	MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463 After updating using the master DVD
11.2	Remove the master Blu-ray disc from the Blu-ray player and disconnect the front USB connectors	MODEL 205, 222 After updating using the master Blu-ray disc (for NTG 5.0)
11.3	Remove USB stick from the front USB connections	MODEL 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 222, 231, 242, 246, 463 After updating using the master USB stick (from NTG 4.5 onwards)
12	Switch off COMAND control unit
13	Switch off ignition
	Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
14	Disconnect battery charger
	Notes on battery		AH54.10-P-0001-01A
	Notes on AGM battery		AH54.10-P-0002-01A
		Switch off charger before disconnecting!
15	Close engine hood	MODEL 117, 156, 164, 166, 171, 172, 176, 204, 205, 207, 212, 216, 218, 221, 222, 230, 231, 242, 246, 251, 463
		MODEL 204.3, 207, 212	AR88.40-P-1000EW
		MODEL 204.3, 207, 212 with CODE U60 (Active Bonnet (Pedestrian protection)) Close engine hood: Mount left and right clamping levers at the upper left and right hinges.