Remove and install cover on rear seat cushion - AR91.18-P-1850SC

MODEL 216.3 

Fig 1: Identifying Cover On Rear Seat Cushion Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove left or rear seat cushion		AR91.12-P-1020SC
2	Unclip cover (1) from padding (2) at side
3	Slip cover (1) over upholstery (2)
4	Unclip stitching wires (3) from staple clips (5)	Open staple clips (5) with care, otherwise the staple clips (5) may snap off.
5	Remove stitching wires (3) from cover (1) as far as stitching wire pocket (4)
6	Fold back cover (1) as far as stitching wire pocket (4)
7	Unclip stitching wire in stitching wire pocket (4) from staple clips (6)	Open staple clips (6) with care, otherwise the staple clips (6) may snap off.
8	Remove the upholstery (1).
9.1	Remove stitching wires (3) and stitching wire in stitching wire pocket (4) from cover (1)	When fitting new cover (1).
10	Install in the reverse order