Remove/install bulbs of headlamp unit - AR82.10-P-1201SCS

MODEL 216.3 as of model year 2011

Fig 1: Identifying Headlamp Unit Remove/Install Components

Courtesy of MERCEDES-BENZ USA

Picture item, etc.	Work instructions
	Risk of death caused by high voltage at xenon headlamps. Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components at xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by toxic salts and mercury compounds being ingested or coming into contact with skin	Do not come into contact with parts that are under high voltage. Persons with active electronic implants (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure sufficient ventilation in the working area.	AS82.10-Z-0001-01A
		Do not touch glass bulb elements of bulbs with fingers but rather use a soft cloth free of oil and grease, otherwise bulbs may be damaged during operation by overheating
	Switch off ignition and withdraw transmitter key or Keyless Go start/stop button from the EZS control unit	Keyless Go start/stop button only on vehicles with code (889) Keyless Go.
	Remove/install fender liner in front fender	To change left bi-xenon lamp with integral ignition module (E1e10) or right bi-xenon lamp with integral ignition module (E2e10).
E1e1, E2e1	Left high beam/motorway spotlight, right high beam/motorway spotlight	On vehicles without code (610) Night View Assist. Remove housing cover (2), remove left high beam/motorway spotlight (E1e1) or right high beam/motorway spotlight (E2e1).
E1e10, E2e10	Left bi-xenon lamp with integral ignition module, right bi-xenon lamp with integral ignition module	Remove housing cover (1), disconnect electrical connection, remove left bi-xenon light with integral ignition module (E1e10) or right bi-xenon light with integral ignition module (E2e10).
E1e11, E2e11	Left infrared lamp, right infrared lamp	On vehicles with code (610) Night View Assist. Remove housing cover (2), remove left infrared lamp (E1e11) or right infrared lamp (E2e11).