Remove/install starter battery - AR54.10-P-0008SX

MODEL 216.3 up to 1.6.08 except CODE (809) 

Model year 2009 MODEL 221.0 /1 up to 1.6.08 except CODE (809) Model year 2009 

Shown on model 221 

Fig 1: Identifying Starter Battery, Retaining Clip, Venting Hose, Positive Line And Ground Cable

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of explosion  caused by oxyhydrogen gas. Risk of poisoning and caustic burns  caused by swallowing battery acid. Risk of injury  caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
	Notes on battery		AH54.10-P-0001-01A
1	Disconnect ground line (4) from starter battery (G1/4)	Do not disconnect ground line from onboard electrical system battery.	AR54.10-P-0003SX
2	Remove retaining bracket (1)
3	Disconnect positive lead (3) on starter battery (G1/4)	Installation:  Pay attention to tight seating of the positive line (3) otherwise damage to the positive terminal and electrical system can occur.
4	Detach bleed hose (2) and remove starter battery (G1/4)	If the starter battery (G1/4) is replaced the defective starter battery (G1/4) must be properly disposed of. Refer to: ↓
	Dispose of battery		OS54.10-P-0001-01Z
5	Install in the reverse order