Perform adjustments to the control system - AR54.30-P-1000-02ESX

Deactivate/activate easy entry/exit feature 

1. Insert key into EIS [EZS] control unit (N73).
2. Turn the turn/push control (A40/9s11) until the basic menu "Vehicle" is shown against a high lighter bar in the COMAND display (A40/8).
3. Confirm the selection by pressing the turn/push control (A40/9s11).
4. Turn the turn/push control (A40/9s11) until the menu item "Easy entry/exit" appears in bold.
5. Confirm the selection by pressing the turn/push control (A40/9s11).
   Fig 1: Identifying COMAND Display, Control Unit And Turn/Push Control

   Courtesy of MERCEDES-BENZ USA
6. Note the option of easy entry/exit chosen by the customer.
7. Turn the turn/push control (A40/9s11) until in the selection list "off" is shown against a highlighter bar.
8. Confirm the selection by pressing the turn/push control (A40/9s11).
9. At the conclusion of the work set the option of easy entry/exit again chosen by the customer.